Chevy Colorado manually change oil

How manual change motor oil on Chevy Colorado

If you’re looking to change the motor oil in your Chevy Colorado yourself, it can be a fairly straightforward process. Here are the steps you’ll need to follow:

  1. Gather your supplies: You’ll need a few key items to change your oil, including a new oil filter, new oil, a wrench, a jack and jack stands, an oil catch pan, and a funnel.
  2. Warm up the engine: Start the engine and let it run for a few minutes to warm up the oil. This will make it easier to drain.
  3. Lift the vehicle: Use a jack to lift the front of the vehicle and support it with jack stands. Make sure the vehicle is secure before you crawl underneath it.
  4. Locate the drain plug: The drain plug is located on the bottom of the oil pan. Use your wrench to loosen it and place the oil catch pan underneath to catch the old oil.
  5. Drain the oil: Once the plug is removed, the oil will start to drain. Let it drain completely before moving on to the next step.
  6. Remove the old filter: Locate the oil filter and use your wrench to remove it. Be sure to have the oil catch pan ready, as there will be some oil that comes out with the filter.
  7. Install the new filter: Apply a thin layer of oil to the rubber gasket on the new filter and screw it into place.
  8. Replace the drain plug: Once the oil has finished draining, replace the drain plug and tighten it with your wrench.
  9. Add new oil: Use your funnel to add the new oil to the engine. Check your owner’s manual for the correct type and amount of oil to use.
  10. Check the oil level: Start the engine and let it run for a minute or two. Then, turn off the engine and check the oil level with the dipstick. Add more oil if needed.
  11. Lower the vehicle: Once you’ve confirmed that the oil level is correct, lower the vehicle back to the ground.
  12. Dispose of the old oil: Old motor oil should be taken to a recycling center or an auto parts store that accepts used oil.

By following these steps, you can change the motor oil on your Chevy Colorado yourself and ensure that your vehicle is running smoothly. However, if you’re not comfortable with performing this task yourself, it’s always a good idea to take your vehicle to a professional mechanic to have the oil changed.